Natural gas safety

Your safety is important to us. We recommend homes and business have natural gas detectors, carbon monoxide detectors, smoke detectors and fire extinguishers. Follow the manufacturer’s directions for operation, placement and maintenance. In addition, before the heating season, we recommend you have a professional come to your home or business and inspect your fuel-burning appliances and all heating and venting equipment.

Important natural gas odorant information

Although we add a distinctive odor to natural gas as a safety precaution to assist in the detection of leaks, your sense of smell might not be enough to detect a leak.

• Strong smells in the area, like cooking or chemical odors, can mask the smell of natural gas.
• Prolonged exposure to the same smell can desensitize you to it (called olfactory fatigue).
• Certain conditions in the soil or pipes can cause the natural gas odor to fade or be stripped out of the gas, so that it is not readily detectable.

Individuals with a known inability to smell are especially at risk. If this is you, don’t take chances. Get a natural gas detector and carefully follow the manufacturer’s directions for operation, placement and maintenance.

Know the warning signs of CO poisoning

What can you do to avoid CO poisoning?

You play a role in safe and reliable service

To assure safe and reliable service, pipelines and gas meters must be accessible. If you plan to do work on your property that will affect the location or accessibility of a gas meter or service line, please call Alliant Energy to arrange for us to evaluate your plans.

If you add shrubs or bushes to your property, please avoid gas meters and furnace exhaust pipes. Planting in front of gas meters can cause maintenance issues and prevent proper venting. Blocking furnace exhaust pipes can cause carbon monoxide buildup in your home.

In order to perform required safety inspections on our pipelines, we must have clear access to the pipeline right-of-way, the area on either side of our pipeline. This area must be clear of trees, fences, buildings and other structures. We greatly appreciate your cooperation.

Fire pit placement

Inspect your gas appliances

Natural gas connectors, like those used on ranges, water heaters and clothes dryers, must be inspected regularly and replaced as needed. Only a qualified professional should check for and replace your connector. Certain flexible connectors manufactured between 1970 and 1980 may fail over time and need to be replaced.

After disconnecting a gas appliance, always remove the old connector and cap the gas line.

Check the temperature of your hot water

Do not set your water heater temperature above 120 degrees. Always check the water temperature before placing a child in the bathtub, and never leave a child alone or with other young children in the bathtub.

Know the kind of gas piping you have in your home or building

If your home or business was built after 1990, or you’ve had work done to the natural gas system, it is likely that corrugated stainless steel tubing (CSST) was installed. If lightning strikes a structure containing improperly installed CSST, the lightning will travel along the structure’s natural gas piping and could cause a leak or fire.

Have a professional inspect your building or home for CSST if you cannot do it yourself. If you find CSST, Alliant Energy recommends having a licensed electrician make sure it’s bonded and grounded properly.

All types of gas pipes should be properly maintained and never used for unintended purposes, like hanging clothes.

Buried fuel lines

Some homes and businesses have privately buried natural gas or fuel lines that run to an unattached garage, grill or pool. Customers, not Alliant Energy, are responsible for natural gas lines after the meter. Customer must maintain, operate and know the location of buried lines. A qualified technician should regularly inspect it for leaks. If the pipe is metallic, inspect it for corrosion. Repair if unsafe, or shut off the flow of gas. Prior to excavating, have the piping located and marked. Excavating performed near the pipe should be done by hand.

It might not be a simple clog. Sewer lines can be damaged when new power lines or natural gas pipes are installed underground. Sometimes the two lines can intersect. This is called a cross bore. The problem can go undetected for years. You could be injured trying to clear a clog from a cross bore. If a cross bore is discovered:

• Do not operate any equipment.
• Evacuate yourself and others.
• Call 911 and the natural gas company from a remote location.
• Eliminate any ignition sources.

Disaster preparation

Disasters can occur anytime and anywhere. You can minimize risks to people and damage to property by knowing what to do before a disaster.

• Prepare and practice a disaster plan.
• Have a professional inspect and repair any gas connections.

After a disaster:

• Call us at 1-800-ALLIANT (800-255-4268) to have your gas service turned back on. Never do it yourself.
• Check for gas leaks when returning. Evacuate and call usfrom a remote location if a leak is suspected.
• Replace any appliance that has been submerged in water.

Winter storm safety

Snow and ice can damage or block natural gas meters and exhaust vents for appliances, especially following a major snow storm. Chimneys and vents on the roof or side of a building must be clear to allow proper venting, which prevents accumulation of carbon monoxide or equipment malfunction.

Carefully remove snow or debris using your hands or a broom to enable proper venting. Kicking or using a shovel could cause damage. Safely remove icicles from overhead eaves and gutters so dripping water does not splash and freeze on the meter or vent pipe. If you need help, contact a professional.

An excess flow valve (EFV) is a safety device designed to automatically stop the flow of natural gas in a service line, should the gas service line break or be severed. Assuming your gas load and gas system operating conditions meet certain requirements, Alliant Energy can install an EFV in your existing gas service line.

Select your state to learn more about the requirements and costs:

• Iowa
• Wisconsin

If we need to shut off your natural gas, our technicians will do so safely. The gas will remain off until we make system repairs.

• Do not shut your own gas off or try to turn your own gas on.
• Once repairs have been made, our technician will come to your property to turn your gas back on at no charge. Alliant Energy employees carry badges with photo identification.
• Our technician will need access to relight your pilots. This could include your stove, water heater, furnace or fireplace. An adult (18 years and older) must be present for our technicians to enter a home.
• If you are not home when we come to relight, we will leave a message on your front door or garage door to call us at 1-800-ALLIANT (800-255-4268) for an appointment.

Learn more gas service restoration and safety tips.

Our integrity management program helps us maintain safe, compliant natural gas pipelines. 

How it started

The Pipeline Safety Improvement Act of 2002 requires natural gas pipeline operators like Alliant Energy to develop and implement integrity management programs. These are processes to inspect, assess and maintain natural gas pipelines based on industry best practices.

Through our integrity management program, we:

• Identify high-consequence areas.
• Regularly inspect pipelines through leak surveys and other methods.
• Promptly address potential problems.
• Perform routine maintenance such as corrosion control.
• Communicate pipeline safety issues to public officials, emergency responders and the public.

What are high-consequence areas?

These are spaces that require special focus on safety, including:

• Facilities difficult to evacuate such as hospitals, prisons, schools and assisted-living facilities.
• Outdoor areas where 20 or more people gather, like playgrounds, campgrounds, stadiums and beaches.
• Buildings occupied by 20 or more people on a regular basis such as churches, office buildings and malls.

We prioritize pipeline inspections based on these locations’ specific risks or threats (for example, extreme weather or potential pipeline damage from digging).

If we discover a potential problem during an inspection, our crews respond and fix it, following current industry standards.